• DNC-T2010-R20 Dust Collector; Input Voltage 95-265 VAC, Output 150 VA, LED display
We are no longer a distributor of NCC products. 

DNC-T2010-R20
Accuracy : ±3% over temperature and voltage range
Brand/Series : DNC Series
Dimensions : 8.75"×7.00"×1.103"
Enclosure Rating : NEMA 4
Frequency : 50/60
Hz
Input Type : Voltage
Mounting Type : SMD
Number of Outputs : 10
Output Type : Solid State
Power Consumption : 6.30 VA max plus load
Primary Type : Controller
Special Features : Universal Voltage Input, Digital Microprocessor Controlled Circuitry, Non-Volatile Memory, Easily Programmable, Finger Safe Terminations
Standards : UL, cUL
Temperature, Operating : –40 to +66°C
Type : Dust Collector
Voltage, Supply : 95 to 265
VAC
Features
Operating Voltage: 120 VAC
Each Output: 200 VA Solid State TRIAC
On-Time: Adjustable from 50 to 500 Milliseconds
Operating Temperature: –40°C to +70°C

AMETEK NCC Dust Collector Controls offer sequential control of solenoid valves for pulse or shaker-damper cleaning of dust collectors. They are also used for display lighting, intermittent valve or sequential control. The control has two operating modes: Continuous Mode: The pressure switch terminals are shorted. Upon application of input voltage, the control activates output #1 after the preset off time. It will continue to activate outputs sequentially until input voltage is removed On Demand Mode: The pressure switch terminals are connected to an isolated set of contacts of a differential pressure switch. The control will activate the outputs sequentially whenever the pressure switch contacts are closed. When the pressure switch contacts open, the output sequencing stops. Re-closing of the contacts will cause the control to resume activating the outputs.

DC Input, Pulse Cleaning of Bag House
Dust Collectors
Model DNC-T2010-ADC
FEATURES
Field selectable from 2 to 10 outputs
Solid state timing and switching logic
300% overrated solid state switch
Pressure switch control option on board
12 to 24 VDC input voltage
Adjustable ON and OFF times
High quality locking bushing
potentiometers for timing adjustment
Very low power consumption
Conformally coated for protection
against vibration, humidity, and contamination
LEDs show compartment being cleaned
Metal chassis provided for mounting
directly into NEMA 4 enclosure
Operating Logic: The control can function
in 2 modes.
In Continuous Mode, the pressure switch
terminals are shorted. Upon application of
output voltage, the control activates output
#1 after the preset off time. It will continue
to activate outputs sequentially until input
voltage is removed.
In On Demand Mode, the pressure switch
terminals are connected to an isolated set
of contacts of a differential pressure switch.
The control will activate the outputs sequentially
whenever the pressure switch contacts
are closed. When the pressure switch contacts
open, the output sequencing stops.
Re-closing of the contacts will cause the
control to resume activating the outputs.
Program wire allows the user to select the
maximum number of outputs to be activated.
Note: Controls are shipped with jumper across pressure switch
terminals.

SPECIFICATIONS
TIME SETTING RANGES
ON-Time: Adjustable from 20 to 200 ms
OFF-Time: Adjustable from 1.5 to 60 sec.
Repeatability: ±3% over temperature and voltage
ranges
INPUT
Operating Voltage: 10.0 to 29.0 VDC (unfiltered
supply voltage must be full-wave rectified)
Power Consumption Voltage During Off Time:
1.5 W at 12 VDC, 4.2 W at 24 VDC
OUTPUT
Type: Solid state switch
Load Per Output: 3 A max. at 1.5 V less than
input voltage
PROTECTION
Transient Input Voltage: Metal oxide varistor
plus large filter capacity
Transient Output Voltage: Solid state switch
rated at 10 A to 60 V fly-back diode protected
Short Circuit Protection: 3 A fuse for circuit,
reverse polarity protected
ENVIRONMENTAL
Operating Temperature: -40°F to 150°F (-40°C
to 65°C)
Storage Temperature: -40°F to 185°F (-40°C to
85°

Write a review

Note: HTML is not translated!
    Bad           Good

DNC-T2010-R20 Dust Collector; Input Voltage 95-265 VAC, Output 150 VA, LED display

  • Brand: Ametek NCC
  • Product Code: DNC-T2010-R20
  • Availability: Out Of Stock
  • $291.48